For most customers, the choice of facing and centering machine manufacturers is certain knowledge. When ordering facing and centering machines manufacturers must make clear stipulations on equipment parameters, British system, power supply, voltage, and frequency, as well as random accessories, the color of the milling machine, etc. Because of the variety of centering machine industry, and different standards, when customers order, so for centering machine users, when choosing centering machine manufacturers need to pay attention to what problems?
1.Mold Type – There are many kinds of mold, it is necessary to specify the type of mold ordered by the customer.
2.Workpiece machining size – The first selection is based on the size of the workpiece being processed. For example, small and medium-sized workpiece processing base complex profile milling tasks can use smaller specifications of the centering machine, the width of the table below 400mm, and large size complex parts processing needs a larger milling machine, the width of the table is generally controlled in 500-600mm.
3.Workpiece machining accuracy requirements – Select a facing and centering machine according to the precision requirements of the workpiece being processed. At present, precision standards for centering machines have been established in our country, among which professional standards have been established for vertical lifting table facing and centering machine.
4.Workpiece processing characteristics – workpiece processing characteristics facing and centering machine selection. For the machining parts are the frame plane and unequal height step, choose the point-line system of centering machine equipment. In addition, according to the requirements of parts processing in general facing and centering machine based on the increase of indexing head and rotary table, can be processed spiral groove, and blade parts.
The characteristics of mass processing of the workpiece – the selection of a special facing and centering machine for mass procurement. If it is a small batch and the required rate, then the use of a centering machine is very appropriate. Because there is a lot of workpiece fixture reserved in batch, procedures can be stored for reuse.