The gantry milling machining center is a machining center where the axis of the spindle Z-axis is set perpendicular to the table, and the overall structure is a large machining center machine with double columns and a top beam forming a portal structure frame, with a cross beam in the middle of the double columns. It is especially suitable for processing large workpieces and workpieces with complex shapes.
1. The operator should be familiar with, and master the performance and characteristics of the gantry machining center machine. Ensure quick and effective emergency stop switch for injury accident prevention.
2. Wear labor protective equipment according to the regulations, gloves are strictly prohibited to operate.
3. When the equipment is working, do not touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.
4. Do not place tools or non-machining workpieces on the gantry machining center or moving objects.
5. Sturdy table next to machine, not on moving parts for safety.
6. When loading and unloading workpieces, stop the machine first, and pay attention to keeping a proper distance between workpieces and tools. Please do not open the front door and the left and right cover arbitrarily when the machine is running to avoid injury.
7. Test run machine with DRY RUN after tool setup for program verification.
8. When shutting down the machine after a power failure or emergency stop, make the three axes return to the original position of the machine.9. Do not remove the travel switch or any parts related to the protection switch without permission.
10. Before leaving the machine at the end of the work, the control power switch of the operation panel and the main switch of the electrical box should be closed.
The above is the relevant knowledge points, I hope the above content can help you, thank you for watching and support, later will organize more information for you, please pay attention to our website updates.