Description
Our lathe milling machine is 3 machines in 1! The lathe is very spacious, with large travels. The milling drilling head has a heavy-duty MT3 spindle taper with 4.3 inches of travel. The tool post doubles as a work-holding vise for your mill! The lathe milling machine MP800 also comes with a drill chuck that can be used both in the tailstock and the drilling head spindle. Included with your new MP800 are change gears, dead centers, and reversible jaws for the 3 jaw chuck.
Features
- Compact, versatile combination machine.
- Adjustable height drill/mill head increase capacity.
- Fine feed handle and clutch for precision milling.
- Headstock provides two step of feeds.
- Spindle is supported by high precision bearing.
- T-slot cross slide.
- Adjustable grids for the slideway.
- Power longitudinal feed allows threading.
- High precision chuck.
Specification
Specification | MP500/MP800 |
Swing over bed | 420mm(16-5/9″) |
Distance between centers | 500mm/ 800mm(20″/31-1/2″) |
Max. longitudinal travel | 440mm/740mm(17-1/3″/29-1/8″) |
Max. cross travel | 200mm(7-7/8″) |
Taper of spindle | MT4 |
Spindle hole | φ28mm(1-1/9″) |
Step of spindle speed | 7 steps |
Range of spindle speed | 160-1360rpm |
Barrel travel | 70mm(2-3/4″) |
Taper of center | MT3 |
Metric thread range | 0.2-6mm |
Inch thread range | 4-120T.P.I |
Longitudinal range of automatic feeding | 0.05-0.35mm/ 0.002-0.014″ |
Cross range of automatic feeding | 0.05-0.35mm/0.002-0.014″ |
Max. drilling capacity | φ22mm(7/8″) |
Worktable size (L×W) | 475×160mm(18/1-2″×6-2/7) |
Max. end mill | φ28mm(1-1/9″) |
Max. face mill | φ80mm(3-1/7″) |
Distance between spindle center and column | 285mm(11-2/9″) |
Distance between spindle and worktable | 306mm(12″) |
Headstock travel of up and down | 110mm(4-1/3″) |
Spindle taper | MT3 |
Step of spindle speed | 16steps |
Range of spindle speed | 120-3000r.p.m |
Swivel degree of headstock | ±360° |
Motor power | 0.75kw |
Packing size | 1430/1130×580×1100mm |
N. weight/G .weight | 245kg/280kg |
Loading amount | 40pcs/20’container |